• 地址:山东省济南市高新区邢村立交桥路北
  • 联系人:张经理
  • 手机:18605312229
新闻中心当前位置:首页-新闻中心

  YT15(P10)硬度≥91适于碳素钢与合金钢连续切削的半精车及精车。断续切时的精车。旋风车丝,连续面的半精铣和精铣,孔的粗扩与精扩。YT14(P20)硬度≥90.5适于对碳素钢与合金钢不平整面进行连续切削时的粗车,间断切削是的半精车与精车,连续面的粗铣,铸孔的扩钻等。

  YT15 (P10) hardness (> 91) is suitable for semi-finishing and finishing of continuous cutting of carbon steel and alloy steel. Fine car for intermittent cutting. Cyclone wire, semi-finish milling and finish milling of continuous surface, rough and fine hole expansion. YT14 (P20) hardness (> 90.5) is suitable for rough turning in continuous cutting of carbon steel and alloy steel irregularities. Intermittent cutting is semi-finish turning and finish turning, rough milling of continuous surface, drilling of cast holes, etc.

  数控刀片回收: YT5(P30)硬度≥89.5适于碳素钢与合金钢(包括锻件,冲压件及铸件的表皮)不平整面切削时的粗车,粗刨,半精刨,粗铣等。YG8(K30)硬度≥89.0适于铸铁,有色金属及其合金,非金属材料不平整表面和间断切削时的粗车,粗刨,粗铣,一般孔和深孔的钻扩,扩孔。

  NC blade recovery: YT5 (P30) hardness (> 89.5) is suitable for rough turning, roughing, semi-finishing and rough milling of carbon steel and alloy steel (including the surface of forgings, stampings and castings). YG8 (K30) hardness (> 89.0) is suitable for rough turning, roughing, rough milling, drilling and reaming of general and deep holes in cast iron, non-ferrous metals and their alloys, uneven surfaces of non-metallic materials and interrupted cutting.

                      数控刀具刀片回收

  YW1(M10)硬度≥91.5材质适于耐热钢,刚猛钢,不锈钢及合金钢等难加工钢材的加工,也适于普通钢材,铸铁的加工。YS25(P25)硬度≥90.5适于碳素钢,铸钢,高锰钢,高强度钢的及合金钢的粗车,铣削和刨削。

  YW1 (M10) hardness (> 91.5) material is suitable for the processing of refractory steel, rigid steel, stainless steel and alloy steel, as well as ordinary steel and cast iron. YS25 (P25) hardness (> 90.5) is suitable for rough turning, milling and planing of carbon steel, cast steel, high manganese steel, high strength steel and alloy steel.

  YG6X(K10)硬度≥91.0适于合金铸铁.普通铸铁的精加工及半精加工。

  YG6X (K10) hardness (> 91.0) is suitable for finishing and semi-finishing of alloy cast iron, common cast iron.

  YS8(M05)硬度≥92.5S适用于铁基、镍基高温合金,高强度钢的精加工,冷硬铸铁、耐热不锈钢、高锰钢、淬火钢的精加工。

  YS8 (M05) hardness (> 92.5S) is suitable for finishing of iron-based and nickel-based superalloys, high strength steels, chilled cast iron, heat-resistant stainless steel, high manganese steel and quenched steel.

  YG8N(K20K30)硬度≥90适于铸铁及有色金属的粗加工,亦适用于不锈钢的粗加工及精加工。

  YG8N (K20K30) hardness (> 90) is suitable for rough processing of cast iron and non-ferrous metals, as well as for rough and finish processing of stainless steel.