你好,欢迎浏览济南恒鑫刀具回收有限公司网站!
数控刀片回收

专心 专注 专营

服务好 效率高 诚信好 价格高

数控刀片回收

联系电话:

18605312229

当前位置:首页>新闻中心>行业新闻>数控刀片回收的意义表哪些方面呢?

数控刀片回收的意义表哪些方面呢?

来源:http://www.hxdphs.com/ 日期:2019-12-21 发布人:admin

数控刀片回收用途是什么?数控工具现在很多机械加工厂都会用到,今天告诉小编我们是关于钨钢铣刀的使用,希望能给你帮助。钨钢铣刀在反向铣削过程中,数控刀片回收的用途是什么?数控工具现在很多机械加工厂都会用到,今天告诉小编我们是关于钨钢铣刀的使用,希望能给你帮助。

  What is the recycling use of CNC blade? CNC tools are now used in many machining plants. Today, tell Xiaobian that we are about the use of tungsten steel milling cutter. I hope I can help you. In the process of reverse milling of tungsten steel milling cutter, what is the use of CNC blade recycling? CNC tools are now used in many machining plants. Today, I will tell you that we are about the use of tungsten steel milling cutter. I hope I can help you.
  钨钢铣刀在反向铣削时,从钨钢铣刀片的零屑厚度进行切削,这样就会产生较高的切削力,然后将钨钢铣刀与工件相互推开。钨钢铣刀刀片被迫进入切口后,通常会接触到刀片造成的加工硬化面,在摩擦和高温的作用下会产生摩擦和抛光效果。切削力也使得从工作台提起工件变得更容易。
数控刀片回收
  When the tungsten steel milling cutter is in reverse milling, it cuts from the zero chip thickness of the tungsten steel milling insert, which will produce higher cutting force, and then push the tungsten steel milling cutter and the workpiece away from each other. When the tungsten steel milling cutter blade is forced into the notch, it usually contacts the work hardening surface caused by the blade, which will produce friction and polishing effect under the action of friction and high temperature. The cutting force also makes it easier to lift the workpiece from the table.
  钨钢铣刀在铣削过程中,从钨钢铣削刀片的最大切屑厚度进行切削。这通过减少热量和减少加工硬化倾向来避免抛光效果。采用最大的切屑厚度,切削力使工件更容易推入钨钢铣刀进行切割。
  During the milling process of tungsten steel milling cutter, the maximum chip thickness of tungsten steel milling cutter is used for cutting. This avoids the polishing effect by reducing heat and working hardening tendency. With the maximum chip thickness, the cutting force makes it easier to push the workpiece into the tungsten steel milling cutter for cutting.
  在钨钢刀具的铣削过程中,切屑有时被粘接或焊接到切削刃上,并聚集在下一个切削刃的开始处。在反向铣削过程中,嘉兴钨钢铣刀容易将破碎的切屑回收,使其卡在或卡在刀片与工件之间,导致刀片断裂。铣削时,同样的切屑会被劈成两半,不会损坏切削刃。
  In the milling process of tungsten steel tools, chips are sometimes bonded or welded to the cutting edge and gathered at the beginning of the next cutting edge. In the process of reverse milling, Jiaxing tungsten steel milling cutter is easy to recover the broken chips, so that they are stuck or stuck between the blade and the workpiece, resulting in blade fracture. When milling, the same chip will be split in two, without damaging the cutting edge.
  无论机床、夹具和工件的要求如何,铣削都是首选方法。由于切削力使工件向下,同时容易推动刀片向前,所以铣削加工有一定的特殊要求。这就要求机床消除齿缝,以满足工作台的进给要求。如果将刀具推入工件,则会随意添加进给,导致切屑厚度过大,导致刀片崩坏。
  Milling is the preferred method regardless of machine tool, fixture and workpiece requirements. Because the cutting force makes the workpiece downward and it is easy to push the blade forward, there are some special requirements for milling. This requires the machine to eliminate the tooth gap to meet the feed requirements of the table. If the tool is pushed into the workpiece, the feed will be added at will, resulting in excessive chip thickness and blade collapse.
  在这种应用中应该选择反向铣削。另外,如果加工余量变化很大,现在选择反向铣削更有利。为了正确夹紧工件,有必要要求适当的夹具,同样的工作要求正确的。
  Reverse milling should be selected in this application. In addition, if the machining allowance changes greatly, it is more advantageous to choose reverse milling now. In order to clamp the workpiece correctly, it is necessary to require proper clamps, and the same work requires correct ones.
  以上就是对数控刀片回收意义的介绍,想要了解更多,欢迎访问官网http://www.hxdphs.comThe above is the introduction of the significance of CNC blade recycling. To learn more, please visit the official website http://www.hxdphs.com